1812 DH-4 Park Flyer Kit

Detalles del producto

Disponibilidad
En stock

Peso con empaque
0.73 kg

Devolución
Si

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

This is the radio controlled, electric powered Dumas DH-4 Park Flyer Kit. FEATURES: Construction: Hand selected laser cut balsa Vacuum molded cowl Rudder and Elevator Control: Wire pushrod Servo Placement: Mounted in rails on fuselage Landing Gear: 1/16" diameter wire front, tail wire skid requires bending INCLUDES: All balsa, lightweight colored (blue and yellow) tissue covering, two 2" (51mm) diameter plastic main wheels, tail wire skid, CA hinges and all hardware to comlete the kit, instruction manual, two full-size plan sheets, and vacuum molded cowling. REQUIRES: GWS IPS (indoor power system) motor with "A" ratio gear drive GWSG2023 3 channel radio system (minimum) 3 micro servos 5A ESC w/BEC GWSM2059 2 cell 700mAh LiPo battery GWS 8x6 prop, GWSQ2017 Building and field equipment SPECS: Length: 25" (635mm) Wingspan: 35" (889mm) Wing Area: 329sq.in. (22.74 sq dm) Airfoil: Flat bottom Center of Gravity (CG): 1-13/16" (46mm) back from the leading edge of the TOP wing Control Throws- Elevator, Up and Down: 5/8" (11mm) Rudder, Left and Right: 3/4" (20mm) DumasPart DUM1812