YaeTek 4CFM 1/3HP Rotary Vane Air Vacuum Pump HVAC A/C Refrigeration Kit AC Manifold Gauge Set w/Leak Detector R410a R134a R12 R22 R404
Sin Stock
9.65 kg
No
Nuevo
Amazon
USA
- Precautions for vacuum pump maintenance 1. This product strictly prohibits the extraction of flammable, explosive, and toxic gases; 2. This product must not remove gases that are corrosive to metals and can react chemically with pump oil; 3. This product must not remove gases containing particulate dust and a large amount of water vapor; 4. The temperature of the extracted gas shall not exceed 40 ℃, and the operating environment temperature shall be between 5 ℃ and 60 ℃; 5. This product cannot be used as a compression pump or a delivery pump: 6. It is strictly prohibited to operate without oil; 7. When the pump is running, it is strictly prohibited to block the exhaust port; 8.① The voltage used for this product is 192-248V, 50HZ, and the socket must be grounded; ② When unplugging the power supply, be sure to hold the plug and not pull the power cord; ③ Do not place heavy objects on the power cord, do not allow the power cord to be squeezed; ④ Do not use damaged plugs and sockets; ⑤ Do not use damp hands to plug or unplug the power plug; ⑥ Do not plug or unplug the power plug or press the switch in areas with gas leaks. 9. Wear protective goggles when working with refrigerant; 10. Do not directly touch the refrigerant to prevent personal injury caused by the refrigerant; 11. When connecting to the power supply, it is required that all relevant equipment be properly grounded to prevent the risk of electric shock; 12. Due to the surface heating during pump operation, please do not touch the oil tank or motor casing during operation. YaeTek 4CFM 1/3HP Rotary Vane Air Vacuum Pump HVAC A/C Refrigeration Kit AC Manifold Gauge Set w/Leak Detector R410a R134a R12 R22 R404 Vacuum Pump 110V 60Hz 1/3hp Motor 4 CFM Single Stage Rotary Vane Vacuum Pump High Efficiency & Low Noise With Internal High Volume Cooling Fan for Extended Use Heavy Duty Aluminum Alloy Casing Oil Drain Plug Positioned at Bottom of Oil Reservoir Manifold Gauge Blue gauge (low): 2-1/2" diameter, 0-500 PSI Red gauge (high): 2-1/2" diameter, 0-800 PSI Includes 3 color-coded Hoses 43" Long (Red Hose Burst Pressure 4000PSI/MAX working Pressure 800PSI; Blue/Yellow Hose Burst Pressure 3000PSI/MAX working Pressure 600PSI) for R410A, R134A, R12, R22, R404Z etc. Leak Detector Included Note: The shell of the gauge has two styles. The products sent are randomly chosen. Precautions for customers before starting up 1. Upon receiving the new machine, check if there is any obvious damage to the machine and if there is any leakage from the matching oil bottle 2. Confirm that the machine is in good condition. You can unscrew the filter on the oil tank and directly fill it in. After all the oil bottles have been filled, the machine will stand still for a while and the oil mark line at the oil mirror position will be visible 3. Plug in the machine, turn on the switch, and the machine is running. At this time, you can unscrew the intake nozzle of the vacuum pump, block the intake nozzle with your hand, and feel if your fingers are being sucked. If so, it is judged that the vacuum pump is functioning properly and can be vacuumed normally 4. When the machine is running for a long time, do not open it and directly extract the atmosphere. Connect pipes or other equipment to operate and extract the vacuum. If the vacuum is extracted for a long time, it may cause the motor to burn out, so it is important to pay attention
Sin Stock
Selecciona otra opción o busca otro producto.
Conocé más detalles
Vacuum Pump Motor: 110V 60Hz 1/3hp; 4 CFM Single Stage, 5Pa./0.05Mbar; Vacuum Pump Intake Fitting: 1/4" Male SAE; - Manifold Gauge: 1/4" Male SAE; - Hose: 7/16" Female SAE; (fit to 1/4" Male SAE); - 2pcs adapters 1/4 inch Male to 5/16 inch Female; - Quick Connetors: 1/4”male SAE; This Air Vacuum Pump HVAC A/C Refrigeration Kit AC Manifold Gauge Set is for R410A, R134A, R12, R22, R404Z etc. Oil Drain Plug Positioned at Bottom of Oil Reservoir. It is strictly prohibited to operate without oil. After all the oil bottles have been filled, the machine will stand still for a while and the oil mark line at the oil mirror position will be visible PackageIncludes: 1x 4 CFM Single Stage Rotary Vane Vacuum Pump; 1x AC Manifold Gauge Set; 1xLeak Detector; 3 Hoses and other spare parts;