Artículo: AMZ-B08YQJZ3LX

SoloGood

HOBBYEAGLE A3 Super 3 6-Axis Gyro RC Flight Controller Stabilizer Half Set Program Card for RC Airplane Drone

Color:

A3 Super4 Full Set

A3 Super4 Lite Set

A3 Super4 Standard Set

Detalles del producto
Disponibilidad
Sin Stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon
Viaja desde
USA

Sobre este producto
  • Specifications:Main Controller: 32-bit MCUSensor: High-precision 3-axis gyroscope and 3-axis accelerometerGyroscope Scale Range: ±2000 dpsAccelerometer Scale Range: ±4gPWM Output: 920uS ~ 2120uS with 1520uS center length / 50 ~ 333HzInput Voltage: 4.8V ~ 8.4VOperating Temperature: -10 ℃ ~ 50 ℃Size: 43×27×14mmWeight: 10g (excluding wires)External LED ModuleAn external LED module is added to make the gyro even easier and more convenient to install and use.Trainer ModeTrainer Mode is added. When flying in this mode, you can only tilt the plane to a certain angle by giving aileron or elevator stick input. Roll and loop are not allowed in this mode, the plane will be stabilized all the time. This prevents the plane from being tilted into a larger angle that may cause a danger. This mode can be used as emergency rescue, or in other applications, e.g. to have a training for new beginners or to use for FPV6-position Mode SwitchingThis new feature allows you to switch the flight mode among all modes supported during flight, by using a mixing of a 2-position and 3-position toggle switch on your transmitterProgramming Examples for 6-position Switch Mixing Pass-through ChannelsPass-through function is available for [A2] and [E2] channels. When the second aileron or elevator channel is unused, the input signal applied to [A2] or [E2] will directly be passed to the output [OUT4] or [OUT5]. With this feature, the [A2] and [E2] can be used as any other purpose as you need, e.g. throttle, gear or flap, etc

Sin Stock

Selecciona otra opción o busca otro producto.

Este producto viaja de USA a tus manos en

Conocé más detalles

32-bit processor, high-precision 6-axis MEMS sensor, stable hardware design, can provide more reliable performance; Provides 6 flight modes: off mode, normal stabilization mode, attitude lock mode, trainer mode, automatic balance mode and automatic hoist mode Compatible with most traditional receivers, supporting standard PPM single-line receivers and Futaba S.Bus and S.Bus2 single-line receivers 7 kinds of airfoil options, fully support double aileron, double lift, delta wing (flying wing) and V tail mixing control External LED module, supports a variety of flexible installation methods horizontally or vertically