BlueDex Universal Blind Spot Monitoring Assistant DC12V Car Lane Changing Warning 24Ghz Millimeter Wave Sensor Detection System
En stock
0.95 kg
Si
Nuevo
Amazon
USA
- Car Blind Spot Detection System Universal DC12V Car 24Ghz Blind Spot Monitoring Assistant Project specification Electricity Voltage:12V Maximum Power:5W(max) Working Temperature:-40℃ ~ +85℃ Storage Temperature:-40℃ ~ +85℃ Waterproof level:IP6K7K Detection Range: Lateral Distance: 0.3m-4m Rear side Distance: 0.3m-10m Detection Range Accuracy: ≥96% Alarm Range: 1-32.8ft (0.3m-10m) System Alarm Accuracy:≥96% Alarm method: 1. LED light up 2. LED flash and buzzer sound Installation notes (FAQs can be updated dynamically at Q&A). 1. The sensor detection area is radially extended, the maximum distance can reach 32.8ft (10 meters), about the length of 2 cars, giving the driver more reaction time. 2. The working principle of the product: if there is an object to enter the radar detection area at a speed greater than their own car, the detection system will issue warning. 3. NOTE! The installation of the sensors to maintain an inclination angle of 20 degrees (package included with the installation angle ruler). This product has been launched for more than 6 years, and optimized after several upgrades (Upgraded with Infineon chip to improve the accuracy of lane recognition), in sufficient economic premise, to provide the most practical blind spot detection system to assist safe driving. Please know the working principle before installation, familiar with the installation method, for better installation and use.
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conocé más detalles
Car Blind spot detection system makes your driving safer by detecting vehicles approaching from the side or rear blind spots. Poor visibility in the dark, rain, or snow can also be monitored The system host is integrated in two 24Ghz millimeter wave detection sensors, the detection range is 1-32.8ft (0.3-10m) , when the car approaches (objects in relative motion) your car from the side or rear and enters this blind detection zone, the LED light will flash Blind spot detection sensor detects the vehicle approaching alert mode: 1. When the turn signal is off, the LED will light up; 2. When the turn signal (left or right) is on, the LED (left or right) will flash and the buzzer will sound 3 times; 3. When the double flash warning light is on, the LED (left or right) will flash, and the buzzer will sound 3 times Note! The sensor cannot penetrate metal! Please be installed by professional, read the manual carefully before installation (Sensors mounting position, height, angle and wiring guidance) Package Content : Microwave sensor x2; LED light x2; LED lights connection cable x2; Main wire harness with buzzer x1; Microwave sensor connection cable x1; Silicon glue x1; 2x L Brackets, 6x Self-tapping screws(Choose the glue or bracket accessory (included), Cable zip ties; Bevel protractor x1; Installation manual x1