Artículo: AMZ-B0BS6CY22G

TEAMWILL

4PACKS 50MM Guitar Pickup Piezo Transducer Prewired Amplifier With 6.35MM Output

Detalles del producto
Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon
Viaja desde
USA

Sobre este producto
  • The sound pickup is high-quality 50mm Piezoelectric ceramic disc transducer It is very large and can collect a wider range of sound in case you are sure where are the best parts of the sounds. This is a pre-wired, pre-soldered piezo and jack harness which make it easy for you. All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done! Fit for most st music instruments such as Guitar Mandolin Cigar box Guitar Violin Ukulele Banjo, etc. Installation instruction: 1 Take the plastic film down from the back of transducer to expose the adhesive 2 Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response 3 Drill a hole from inside the body, loosen the end-pin jack nut, insert it to the hole and tighten the nut The above procedures depend on different instruments. Specification: color:black Material: metal + plastic Cable long : approx 42cm/16.5 inch Plug Dia: approx 6.35mm/0.25 inch Package included: 4 x Disc piezo pickup
₡ 10,973

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

₡ 10,973

Desbloquea Tasa 0 hasta 18 Meses con BAC*

10% OFF en tu primera compra con cupón: PRIMERA10

Llega en 25 o más días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en

Conocé más detalles

The sound pickup is high-quality 50mm Piezoelectric ceramic disc transducer,It is very large and can collect a wider range of sound in case you are sure where are the best parts of the sounds. This is a pre-wired, pre-soldered piezo and jack harness which make it easy for you. All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done!Fit for most st music instruments such as Guitar Mandolin Cigar box Guitar Violin Ukulele Banjo, etc. Installation instruction:1 Take the plastic film down from the back of transducer to expose the adhesive, 2 Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response,3 Drill a hole from inside the body, loosen the end-pin jack nut, insert it to the hole and tighten the nut The above procedures depend on different instruments. Package included:4 x Disc piezo pickup