Artículo: AMZ-B09HKHLBM4

TANGSPOWER

29.4V 1A Battery Charger Universal for 24V 25.2V 25.9V Lithium Battery Replacement Wall Charger

Detalles del producto
Disponibilidad
En stock
Peso con empaque
0.11 kg
Devolución
Si
Condición
Nuevo
Producto de
Amazon
Viaja desde
USA

Sobre este producto
  • Power Output Voltage 29.4Vdc Min.Load:1A Output Power 30W Nominal Voltage:100-240Vac Variation Range:90-264Vac Nominal Frequency:50/60Hz Variation Frequency:47-63Hz 0.8Arms max At any input voltage and rated, DC output rated load. 30Amps Max. Cold start at 240Vac input, with rated load and 25℃ambient. 0.25mA Max At 240Vac input. PROTECTION REQUIREMENT: Short Circuit Protection: The power supply will be auto recovered when short circuit faults remove. Over current Protection: The power supply will be auto recovered when over current faults remove. Over Voltage Protection: The power supply will not be auto recovered when faults remove. Operating Temperature: 0℃~ -40℃,Full load Normal operation. 0℃to40℃,Full load Normal operation. Storage Temperature:-20℃to85℃,With package Relative Humidity: 5%(0℃)~90%(40℃), 5%(0℃)~90%(40℃)RH,72Hrs, Full load Normal operating. Package include: 1x battery charger 5x power adapters. Tip: To make your batteries last 10X longer, avoid using batteries below 35% and don’t charge above 85-90% LED indicator: No load green light, load red light, full of green. Key Points for Purchase & Use Critical Matching: Must verify the output voltage (29.4V), connector type (5525 / 5521/4017/4817/40135/35135, etc.) and plug polarity at the same time; all three are essential. Battery Distinction: 29.4V chargers are only suitable for 7-series ternary lithium batteries. They must not be used for 8-series lithium iron phosphate batteries (full charge approx. 29.2V). Mixing them may cause overcharging or incomplete charging. How to Confirm: Check the nominal voltage (25.2V) on the scooter nameplate or battery pack, or the output voltage (29.4V) marked on the original charger. Be sure to check your battery's voltage label before purchasing — it's usually printed directly on the battery pack

Producto prohibido

Este producto no está disponible

Este producto viaja de USA a tus manos en

Conocé más detalles

AC/DC Battery Charger for 7S 29.4 Rechargeable Li-ion Battery Pack. Output 29.4V 1A, World Wide Input Voltage 100-240VAC 50/60Hz. DC head 5.5 x 2.1mm (inner positive / negative outside), Double-check your charging port size (this charger has 5.5mm x 2.5mm / 4.0mm x 1.7mm / 4.8mm x 1.7mm / 4.0mm x 1.35mm / 3.5mm x 1.35mm barrel connectors) Verify your battery voltage Premium ABS plastic, exquisite appearance, high temperature wear-resistant and durable. Stable insulation performance, low operating temperature and long service life DC 29.4V/0.6A Charger: Simple and small size, easy to install for 29.4V 7String Battery systems, NOT for 12V 19V 21V 42V 36V 48V 60V 72V 84V versions. Compatible with Enouvation E4 E6 E2 E 4 6 2 ENBATTE47S1P ENBATTE67S ENBATTE27S1P Universal Rechargeable Lithium-Ion Polymer Battery Pack Power Reclining Furniture Supply The DC 29.4V/0.4a Charger protected: stops charging if voltage exceeds safe levels, prevents damage from drawing too much power, regulates current flow to prevent overheating, shuts down if the charger gets too hot, safeguards against electrical faults Charge indicator: Red light means charging, green light means fully charged. It stop automatically when the battery is full.