Eujgoov 2Pcs NiCd NiMH Battery Charger Module Electronic Component Charging Board with Short Circuit Protection (NIUP11TA 2S 1-Cell(2S))
En stock
0.00 kg
No
Nuevo
Amazon
USA
- Specification: Item Type: Charging Module 1-Cell(1S) Version: Charging current about : 230mA-240mA 2-Cell(2S) Version: Charging current about :230mA-240mA 3-Cell(3S) Version: Charging current about : 230mA-240mA 4-Cell(4S) Version: Charging current about : 230mA-240mA 5-Cell(5S) Version: Charging current about : 230mA-240mA 6-Cell(6S) Version: Charging current about : 230mA-240mA 7-Cell(7S) Version: Charging current about : 190mA-210mA 8-Cell(8S) Version: Charging current about : 190mA-210mA USB Power : Short circuit and 0 volt battery activation Battery : Operating Ambient Temperature: -40℃ to +85℃ Storage Temperature: -65℃ to +125℃ Size: Approx. 30 x 15 x 4mm / 1.2 x 0.6 x 0.2in USB power : 2. Short circuit and 0 volt battery activation: NIUP11TA can intelligently detect whether the output is short-circuited and indicate an error. The NIUP11TA allows -term shorts in the output without damaging any circuitry and USB power, and the output is shorted and maintains low power consumption. The NIUP11TA has a 0-volt battery activation function that determines a 0-volt battery when the short-circuit is detected for the first time after power-on. activates the 0-volt battery, and the 0-volt battery activates and enters the normal charging process. If the 0 volt battery is not activated, it will be judged to be a short circuit and the indicator light will start flashing. Battery : Charging process: 1. Battery insertion detection When the charger is powered up, it will automatically detect the or absence of battery insertion. After detecting the 0-volt battery, it will be activated automatically. When the short-circuit is detected, an error will be indicated. If the number of battery packs is not matched with the circuit, an error will be reported. After the correct battery pack is inserted, normal charging will be performed. 2. Pre- 3. Fast charging 4. make up the 5. trickle charging In order to make up for the self-discharge of the battery, it will enter the trickle after the end of charging. The trickle current is 40mA. After entering the trickle , the indicator light has been extinguished. When the user removes the battery, it will enter the cycle. 6. Battery take-out detection When charging is entered, the system will continue to take the battery removal test. After detecting that the battery is removed, it will enter the charging cycle. Package List: 2 x Charging Module Note: 1. The output voltage cannot be measured with a multimeter without a battery. But can be observed with an oscilloscope. 2. If your battery is 1-3Cell, please choose a high current version: NIMHCRTA
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
★ APPLIES FRANCHISE
Conocé más detalles
Suitable For: Suitable for kid toys car, digital cameras, solar charging and audio equipment Electronic Components: Adopted of high quality electronic components, and accuracy process, ensure for the durability Short Circuit Protection: The module has short circuit and 0 volt battery activation Battery Protection: With battery protection, the module has stable performance Usb Power Protection: The module has USB power protection