Esta súper oferta termina en 
Garantía de entrega
Artículo: AMZ-B0CQ1QL1WS
IUYYPU
Right Angle Drill Attachment 90 Degree Adapter, 0.315 in (8 mm) Hex Shank, Keyless Chuck 0.03-0.39 in (0.8-10 mm), 6.10 x 4.02 in, Includes 2 3 4 5 mm Bits
Detalles del producto
Disponibilidad
En stock
En stock
Peso con empaque
0.01 kg
0.01 kg
Devolución
Si
Si
Condición
Nuevo
Nuevo
Producto de
Amazon
Amazon
Viaja desde
USA
USA
Sobre este producto
- Overview This right angle drill attachment changes drill direction by 90 degrees for work in tight corners. Use it for drilling and screw driving where a straight drill body cannot align. Key Specs Angle: 90 degrees Hex shank input: 0.315 in (8 mm) Chuck type: keyless chuck (plastic chuck as listed) Chuck clamping range: 0.03–0.39 in (0.8–10 mm) Adapter size: about 6.10 x 4.02 in (155 x 102 mm) Material: ABS + metal Color: black Compatibility / Fit Fits drill drivers, impact drivers, and electric screwdrivers that accept a 0.315 in (8 mm) hex shank input. Fits drill bits and round shank accessories that can be clamped within 0.03–0.39 in (0.8–10 mm). Fits tight corner tasks where the adapter head size (about 6.10 x 4.02 in) can physically fit. Not for heavy-load drilling or high-torque impact driving expectations. Not recommended for slotted screws when used as a screwdriver. Before buying, confirm your tool accepts a 0.315 in (8 mm) hex shank. Before buying, confirm the bit shank size you need is within 0.03–0.39 in (0.8–10 mm). Before buying, confirm your work area clearance fits a 6.10 x 4.02 in adapter head. How to Use Step 1: Insert the 0.315 in (8 mm) hex shank into your driver. Step 2: Insert the bit, then tighten the keyless chuck by hand. Step 3: Start at low speed and use steady pressure; stop if you hear grinding or feel binding. Troubleshooting tips If it makes a grinding sound under load, reduce torque, lower speed, and check bit alignment. If it binds or locks up, stop immediately and remove load; check for a jammed bit or over-torque. If a screw head strips, switch to a better-fitting bit and avoid slotted screws. Care and Storage Wipe clean after use and store dry. Do not run at high speed under heavy load for extended time. Avoid dropping the tool, which can affect gear alignment. What’s Included - 1 x right angle drill adapter - 4 x drill bits: 0.079 in (2 mm), 0.118 in (3 mm), 0.157 in (4 mm), 0.197 in (5 mm) Quick Answers Q1: What is this product? A1: It is a 90-degree right angle drill attachment for drilling and screw driving in tight spaces. Q2: What does it fit? A2: Fits tools that accept a 0.315 in (8 mm) hex shank input and fits bits clamped in a 0.03–0.39 in (0.8–10 mm) keyless chuck. Q3: What are the key specs? A3: Hex shank is 0.315 in (8 mm). Chuck range is 0.03–0.39 in (0.8–10 mm). Size is about 6.10 x 4.02 in (155 x 102 mm). Material is ABS + metal (plastic chuck as listed). Q4: What is included? A4: Includes 1 right angle adapter and 4 drill bits: 0.079 in (2 mm), 0.118 in (3 mm), 0.157 in (4 mm), 0.197 in (5 mm). Q5: How do I use it? A5: Insert the hex shank into your driver, tighten the bit in the keyless chuck, then run at low speed with steady pressure. Q6: What is it not for? A6: Not for heavy load or high-torque impact driving expectations, and not recommended for slotted screws. Q7: What should I confirm before buying? A7: Before buying, confirm your tool accepts a 0.315 in (8 mm) hex shank, confirm your bit size is within 0.03–0.39 in (0.8–10 mm), and confirm your workspace clearance fits 6.10 x 4.02 in. Q8: What if it grinds or locks up? A8: Stop immediately, reduce load, lower speed, and re-check bit alignment. If it continues, do not force it under torque.
₡ 13,464
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
★ APPLIES FRANCHISE
₡ 13,464
Desbloquea Tasa 0 hasta 12 Meses con BAC*
Envío gratis en tu 1ª compra. Cupón: 1ER-ENVIO
Llega en 5 a 10 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja
de USA ![]()
a tus manos en
![]()
a tus manos en
Conocé más detalles
What it is + primary use + fit scope: 90° right angle drill attachment for drilling and screw driving in tight spaces. Fits tools that accept a 0.315 in (8 mm) hex shank input Key specs: Hex shank is 0.315 in (8 mm). Keyless chuck clamping range is 0.03–0.39 in (0.8–10 mm). Adapter size is about 6.10 x 4.02 in (155 x 102 mm). Material is ABS + metal, with a keyless plastic chuck (as listed). Color is black How to use: Insert the hex shank into your driver, then tighten the bit in the keyless chuck. Start at low speed and apply steady, straight pressure. For screw driving, avoid slotted screws and use controlled torque What’s included: Includes 1 right angle drill adapter and 4 drill bits: 0.079 in (2 mm), 0.118 in (3 mm), 0.157 in (4 mm), 0.197 in (5 mm) Limitations + pre-purchase check: Not for heavy load or high-torque impact driving expectations. Not recommended for slotted screws. Before buying, confirm your tool accepts a 0.315 in (8 mm) hex shank and confirm your bits are within 0.03–0.39 in (0.8–10 mm). Before buying, confirm your workspace clearance fits 6.10 x 4.02 in. Care: wipe clean and store dry. Do not run at high speed under heavy load for extended time
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que sueñas y lo recibas del mundo a tu puerta.
Tarjetas de Débito y Crédito
Pagando en Colones ( ₡ )
Visa
Mastercard
American Express
Pagos a través de PayPal
Compra procesada en dólares con dinero en cuenta o tarjetas internacionales.
PayPal
