Generic Practical Transistor Tester with LCD Display Transistor Checker Thyristors for Diodes Auto Detection, Genericr2gxtp6afq

Conocé más detalles

1. Automatic detection of NPN and PNP transistors, N‑channel and P‑channel MOSFETs, diodes (including double diodes), thyristors, triodes, resistors and capacitors.2. Added boot voltage detection function, one-key operation, can automatically test the component pins and display them on the LCD.3. Can detect the amplification factor and base of transistors, MOSFET diodes, etc. to determine the forward bias voltage of the emitter transistor.4. The display uses LCD(128 x 64 characters), measuring gate threshold voltage and gate capacitance of MOSFET.5. Higher test speed, within 2 seconds of valid component test, (except for larger capacitors, the measurement of large capacitance takes a long time, the 1 minute measurement time is normal).6. Power consumption shutdown mode, less than 20 nA, automatic shutdown to avoid unnecessary waste, save battery energy, and improve battery life.Specification:Conditon: Brand NewItem Type: Transistor TesterMaterial: PlasticColor: As Pictures ShownBattery(Not Included): 9V Cascade BatteryManual:1. Use for ATmega8, for ATmega168 or for ATmega328 microcontrollers.2. 2x16 character LCD display results.3. One-key operation, automatic power off.4. The shutdown current is 20nA, which supports battery operation.5. The low-cost version does not require a oscillator and supports automatic power-off. for ATmega168 or for ATmega328 with 1.05k version software uses sleep mode to reduce power consumption when there is no measurement.6. Automatic detection of PNP and NPN bipolar transistors, N, P-channel MOSFET, JFET, diode, double diode, thyristor thyristor.7. Automatically detect the pin layout.8. Measure the current amplification factor of the bipolar transistor and the threshold voltage of the emitter junction.9. Darlington transistors can be identified by high threshold voltage and high current amplification factor.10. Detection of