Artículo: AMZ-B0DDXMJ7RC

Taidacent

Taidacent High and Low Liquid Level Controller Fish Tank Float Switch Valve Automatic Pumping Non-Contact Water Level Sensor with Three 1 Merer Cable Sensors Water Ingress Detection

Disponibilidad
En stock
Peso con empaque
0.32 kg
Devolución
Si
Condición
Nuevo
Producto de
Amazon

Sobre este producto
  • The non-contact liquid level sensor (hereinafter referred to as the liquid level sensor) adopts advanced signal processing technology and high-speed signal processing chip, which breaks through the influence of container wall thickness and realizes a true non-contact type of liquid level height in a closed container Detection.
  • The liquid level sensor (probe) is installed on the upper and lower sides of the outer wall of the container to be measured (the high and low levels of the liquid level).
  • The non-metallic container does not need to be opened, and the installation is simple and does not affect production. It can detect the liquid level of various liquid toxic substances, strong acids, strong alkalis and various liquids in high-pressure airtight containers. The liquid level sensor has no special requirements for the material of
  • AC110V-250V power supply; Relay dry node output, suitable for various load control.
  • The control is diversified, and the pump can be controlled in manual or automatic mode
₡ 32,358

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

₡ 32,358

Desbloquea Tasa 0 hasta 24 Meses con BAC*

10% OFF en tu primera compra con el código: PRIMERA10

Llega en 5 a 10 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en
Medios de pago Tarjetas de Débito y Crédito

Compra protegida

Disfruta de una experiencia de compra segura y confiable

Conocé más detalles

This high and low level controller can realize the function of liquid level high and low control: when the container liquid level is too low, the low liquid level alarm signal sent by the low liquid level sensor is triggered to trigger the controller to close the relay to start the water pump Add the liquid level, when the liquid level reaches a certain height, the high liquid level sensor sends out a signal to trigger the controller to disconnect the relay and automatically stop the water pump to work in a cycle. Thereby, the function of automatic control of the container liquid level is realized, and the container liquid level is kept stable.