Yamaha HS5 Powered Studio Monitor Pair with HS8S Subwoofer Bundle — 5-Inch Bi-Amplified Nearfield Speakers, 8-Inch Sub, 2.1 Monitoring System for Mixing, Mastering, Music Production and Home Recording

Conocé más detalles

COMPLETE 2.1 STUDIO MONITORING SYSTEM: The Yamaha HS5 bundle includes 2 HS5 bi-amplified nearfield studio monitors and 1 HS8S 8-inch powered studio subwoofer for a full-range 2.1 reference monitoring setup that covers 22Hz to 30kHz; everything a mixing or mastering engineer needs for accurate frequency reproduction from the deepest bass to the highest harmonics YAMAHA HS5 BI-AMPLIFIED NEARFIELD MONITORS: Each HS5 features a 5-inch cone woofer and 1-inch dome tweeter driven by a dedicated 70W bi-amp system with 45W powering the low frequencies and 25W powering the highs; the 2-way bass-reflex design delivers a frequency response of 54Hz to 30kHz with the flat, uncolored accuracy that has made the Yamaha HS Series an industry standard for reference monitoring YAMAHA HS8S POWERED SUBWOOFER EXTENDS BASS TO 22HZ: The 8-inch cone woofer with 150W class-D amplifier reaches down to 22Hz for accurate low-frequency monitoring that the HS5 monitors cannot reproduce on their own; adjustable HIGH CUT and LOW CUT crossover controls from 80Hz to 120Hz with a PHASE switch let you integrate the subwoofer seamlessly with the monitors for balanced bass response in any room IDEAL FOR MIXING, MASTERING AND MUSIC PRODUCTION: Whether you are mixing tracks in a home recording setup, mastering for distribution, producing electronic music, scoring film and game audio or setting up a project studio for vocal tracking, this 2.1 powered monitor system delivers the flat frequency response and transient detail needed for critical listening and confident decision-making at the mix position ROOM CONTROL AND HIGH TRIM RESPONSE CONTROLS: Each HS5 includes dedicated ROOM CONTROL and HIGH TRIM switches that let you adjust the low-frequency and high-frequency response to compensate for room acoustics and speaker placement near walls or corners; these controls ensure accurate reproduction regardless of whether your monitors are on a desk, stands or mounted on a shelf LOW RESONANCE MDF ENCLOSURE WITH NOISE-REDUCED PORT: The HS8S cabinet is built from dense MDF using a traditional three-way mitered-joint technique that anchors the corners for increased durability and reduced resonance; the specially designed bass-reflex port minimizes turbulence and vortex effects by up to 6dB for clean low-frequency reproduction without port chuffing at high output levels XLR AND TRS INPUTS WITH STEREO EXTENSION OUTPUTS: Both the HS5 monitors and the HS8S subwoofer accept balanced XLR and 1/4-inch TRS connections from any audio interface, mixer or monitor controller; the HS8S also includes stereo XLR extension sub outputs so you can daisy-chain an additional subwoofer or route the high-passed signal to the monitors for flexible 2.1 system configuration